Collection: Monarch Floors Peckham Collection
Shop Monarch Floors Peckham EIR glue-down LVP in Rye Lane, Nunhead, Blenheim, Copeland, and Choumert. Compare wood-look planks with a 20 mil wear layer, 2.5mm thickness, and 7x48-inch dimensions. Review texture, samples, and adhesive requirements before ordering.
-
Peckham Collection | Nunhead 20mil 2.5mm 7x48 LVP Glue Down EIR
Vendor:Monarch Floors$2.00 / sq. ft. $82.00 per carton · 41.094 sq. ft. / carton2.5mm20mil7x48 -
Peckham Collection | Rye Lane 20mil 2.5mm 7x48 LVP Glue Down EIR
Vendor:Monarch Floors$2.00 / sq. ft. $82.00 per carton · 41.094 sq. ft. / carton2.5mm20mil7x48 -
Peckham Collection - Blenheim | 20mil 2.5mm 7x48 LVP Glue Down EIR
Vendor:Monarch Floors$2.00 / sq. ft. $82.00 per carton · 41.094 sq. ft. / carton2.5mm20mil7x48 -
Peckham Collection - Copeland | 20mil 2.5mm 7x48 LVP Glue Down EIR
Vendor:Monarch Floors$2.00 / sq. ft. $82.00 per carton · 41.094 sq. ft. / carton2.5mm20mil7x48 -
Peckham Collection - Choumert | 20mil 2.5mm 7x48 LVP Glue Down EIR
Vendor:Monarch Floors$2.00 / sq. ft. $82.00 per carton · 41.094 sq. ft. / carton2.5mm20mil7x48
Shop Monarch Floors Peckham EIR Vinyl Flooring
Peckham is a Monarch Floors glue-down LVP collection with five designs currently available here. Its Embossed in Register, or EIR, surface aligns texture with the printed wood design. The listed products combine that texture with a 20 mil wear layer, 2.5mm thickness, and 7x48-inch dimensions. Compare the actual range products and choose a design for your interior.
A Defined 20 Mil, 2.5mm, 7x48 Format
The listed Peckham floors combine a 20 mil protective wear layer, 2.5mm overall thickness, and seven-inch-wide by 48-inch-long planks. These dimensions help you compare the products on a consistent basis. The glue-down construction also makes adhesive compatibility and substrate preparation part of the purchase decision.
Choose From Five Peckham Designs
Compare Rye Lane, Nunhead, Blenheim, Copeland, and Choumert. Product imagery shows the decorative wood pattern, while a sample lets you inspect the surface texture and tone alongside your own cabinetry and furnishings. Look at the floor in both daylight and artificial lighting. Review room photographs to judge the design across multiple boards rather than relying on a small sample alone.
Plan a Bonded Installation Before Ordering
Confirm that the selected flooring and adhesive are approved for your substrate and intended use. Your installer should check moisture, flatness, and surface preparation before installation. Follow the adhesive's instructions for coverage, trowel selection, working time, and when the area can return to use. Explore flooring adhesive after verifying the installation specification.
Shop Texture Without Confusing Performance Claims
EIR can make a wood-look surface more convincing, but it does not guarantee that a floor is scratch-proof or suitable for every project. Evaluate wear protection, warranty conditions, maintenance requirements, and commercial approval separately. For an active business space, check the conditions for the exact product and expected use before selecting the quantity.
Complete Your Peckham Flooring Order
Measure all areas, choose the waste allowance appropriate to the layout, and calculate cartons using the selected product's published coverage. Coordinate exposed edges and adjoining floor heights with compatible transition strips. Browse Monarch Floors for the wider brand selection, or 7x48 glue-down LVP when comparing the same plank format across other available ranges.
Choose Your Monarch Floors Peckham Products
Start with Rye Lane and Nunhead , then compare the other designs in the product grid above. Review the exact product's coverage and installation details before adding cartons to your order.
Continue Shopping by Specification
For a selection organized by specification or product category, browse EIR Glue-Down LVP. Use this named range page when you want to compare the products belonging to Monarch Floors Peckham.
Frequently Asked Questions
What does EIR mean?
Embossed in Register means the physical surface texture is aligned with details in the printed wood design.
Which Peckham designs are available here?
The current selection includes Rye Lane, Nunhead, Blenheim, Copeland, and Choumert.
Does EIR describe a thicker wear layer?
No. EIR describes the texture. The listed Peckham wear layer is 20 mil, and overall flooring thickness is 2.5mm.
Is adhesive needed for these products?
Yes. The listed products use glue-down installation. Confirm the approved adhesive and preparation system for the exact product and substrate.
Explore related flooring
Browse related flooring collections, brands and styles before making your final choice.




