Collection: Lions Floor 10mm WPC Flooring
Shop Lions Floor 10mm WPC flooring with waterproof rigid cores, 20 mil wear layers, extra-long 9x72 planks, attached acoustic backing, and detailed EIR wood looks. Compare colors, edge styles, and finishes
-
Canyon Coast - Alpine Ambiance | 20mil 10mm 9x72 WPC Vinyl Plank | Lions Floor
Vendor:Lions FloorRegular price From $0.00 USDRegular priceUnit price $4.69/ft²Sale price From $0.00 USD -
Canyon Coast - Wilderness Whispers | 20mil 10mm 9x72 WPC Vinyl Plank | Lions Floor
Vendor:Lions FloorRegular price From $0.00 USDRegular priceUnit price $4.69/ft²Sale price From $0.00 USD -
Canyon Coast - Summit Shoreline | 20mil 10mm 9x72 WPC Vinyl Plank | Lions Floor
Vendor:Lions FloorRegular price From $0.00 USDRegular priceUnit price $4.69/ft²Sale price From $0.00 USD -
Canyon Coast - Everlasting Peaks | 20mil 10mm 9x72 WPC Vinyl Plank | Lions Floor
Vendor:Lions FloorRegular price From $0.00 USDRegular priceUnit price $4.69/ft²Sale price From $0.00 USD
Lions Floor 10mm WPC Flooring
Lions Floor 10mm WPC flooring combines a substantial waterproof WPC profile with 20 mil surface protection, extra-long 9x72 planks, attached backing, and detailed wood-look textures. This focused collection allows customers to compare a precise combination of brand, core construction, thickness, wear layer, and board dimensions.
The approximately six-foot plank length makes this collection especially relevant to customers seeking a larger board scale and fewer visible end joints. Thickness and plank size should still be evaluated alongside the substrate, room dimensions, finished-floor height, transitions, installation system, and warranty.
For a broader manufacturer selection, visit Lions Floor WPC flooring. Customers comparing other WPC manufacturers can browse the complete WPC flooring collection.
Understanding 10mm WPC Construction
The 10mm measurement describes the published total plank profile. It is separate from the 20 mil wear-layer measurement.
Each specification answers a different question:
- Total thickness describes the complete plank height.
- Wear-layer thickness describes the transparent protective surface.
- WPC identifies the core category.
- Plank width and length determine the board format.
- Attached backing describes the bottom layer.
- EIR identifies a coordinated surface-texture process where specified.
A thicker plank is not automatically appropriate for every project. The total profile must be checked against door clearance, appliances, stairs, transitions, exterior entrances, adjoining tile, and other flooring.
Customers comparing equivalent profiles can explore 10mm WPC flooring.
Extra-Long 9x72 Planks
A 72-inch plank is approximately six feet long. Combined with an approximately 9-inch width, this format produces a broad wood-floor appearance with fewer board lines than many conventional vinyl formats.
Extra-long flooring can help emphasize:
- Long sightlines
- Open-concept layouts
- Large living areas
- Connected rooms
- Lengthwise room orientation
- Broad grain visuals
- Contemporary or transitional designs
Customers can compare similar formats through 9x72 WPC flooring, 72-inch WPC flooring, and 9-inch-wide WPC flooring.
Long planks require sufficient handling space and a properly prepared substrate. High spots, depressions, contamination, loose panels, and excessive moisture should be corrected before installation.
Planning the Plank Direction
Extra-long planks make installation direction especially noticeable. There is no universal rule requiring every floor to run toward a window or along the longest wall.
Consider:
- The primary entrance
- Main sightlines
- Hallway direction
- Connected rooms
- Window placement
- Starting-wall straightness
- Focal points
- Transition locations
- Final-row width
- Quantity of end cuts
The layout should avoid extremely narrow final rows and repetitive end-joint patterns. Several cartons should be opened and blended during installation.
EIR Wood-Look Texture
Selected Lions Floor 10mm WPC products use embossed-in-register texture. EIR coordinates the physical embossing with features in the printed wood image, helping visible grain and knots correspond more closely with the tactile surface.
EIR should not be confused with natural wood. The floor remains a manufactured waterproof plank, and its texture does not make it immune to scratches, dents, stains, or wear.
Customers comparing this feature across brands can browse EIR WPC flooring.
Always evaluate physical samples. Digital photography may not show the exact gloss level, undertone, embossing depth, shade variation, bevel appearance, or pattern scale.
Suitable Rooms and Applications
Where approved by the manufacturer, Lions Floor 10mm WPC flooring may be considered for:
- Living rooms
- Bedrooms
- Kitchens
- Dining rooms
- Hallways
- Home offices
- Family rooms
- Finished lower levels
- Large open rooms
- Upstairs living areas
For upper-level applications, compare WPC flooring for upstairs. The exact acoustic documentation required by an apartment, condominium, or homeowners association must still be obtained.
Commercial use should never be inferred from the 20 mil wear layer alone. Confirm that the exact product is approved for the intended setting and protected by an applicable commercial warranty.
WPC Comfort and Acoustic Expectations
WPC flooring is often considered when customers want a less dense underfoot experience than many SPC products. The thicker profile and attached backing may also contribute to the installed floor’s sound characteristics.
However, flooring thickness does not guarantee a room-level acoustic result. Sound performance depends on:
- Subfloor construction
- Floor-ceiling assembly
- Joists
- Insulation
- Attached backing
- Perimeter detailing
- Furniture
- Rugs
- Room shape
- Installation quality
An attached pad does not make the floor soundproof. Building-specific acoustic requirements should be checked before ordering.
Comparing 8mm and 10mm Lions Floor WPC
The defining differences between these two focused Lions Floor collections are overall thickness and plank length.
The 8mm products use approximately 9x60 planks. The 10mm products use approximately 9x72 planks.
Choose between them by considering:
- Room dimensions
- Desired board scale
- Subfloor condition
- Finished-floor height
- Door clearance
- Appliance clearance
- Transition requirements
- Installation logistics
- Available colors
- Warranty requirements
- Budget
One specification should not be selected only because its numbers are larger.
Waterproof Flooring Limitations
The plank core is classified as waterproof, but the installed flooring does not waterproof the room.
Water can still reach:
- The substrate
- Perimeter gaps
- Walls
- Baseboards
- Cabinets
- Floor vents
- Transitions
- Adjoining rooms
Correct active leaks and moisture problems before installation. Clean topical spills promptly and follow the manufacturer’s wet-area restrictions.
Installation Preparation
Qualifying products use an approved floating click-lock system. Before installation, verify:
- Approved substrates
- Subfloor flatness
- Moisture-testing procedures
- Interior environmental conditions
- Product-conditioning instructions
- Expansion requirements
- Transition requirements
- Maximum continuous run
- Fixed-cabinet restrictions
- Radiant-heat limitations
Do not add another underlayment beneath attached backing unless written manufacturer instructions permit it.
Measuring and Ordering
Long planks require thoughtful material planning. Calculate the net floor area and include an allowance for cuts, board selection, stagger, closets, connected rooms, and future repairs.
Additional waste may be needed for:
- Diagonal installations
- Complex floor plans
- Narrow hallways
- Multiple doorways
- Irregular room shapes
- Pattern selection
- Stair and landing integration
Confirm the precise square footage per carton, freight arrangements, storage requirements, transitions, and replacement-stock quantity before ordering.
Frequently Asked Questions
Is Lions Floor 10mm WPC waterproof?
Qualifying products have waterproof plank construction. The floor does not waterproof the complete room or substrate.
How long are the qualifying planks?
Qualifying products use approximately 72-inch, or six-foot, planks. Verify nominal and actual dimensions before installation.
Does 10mm describe the wear layer?
No. Ten millimeters describes the total plank profile. The qualifying wear layer is 20 mil.
Is thicker WPC automatically better?
No. Thickness is only one factor. Construction, dimensions, substrate compatibility, installation, warranty, and intended use also matter.
Can this flooring be installed upstairs?
It may be appropriate where approved, but building-specific acoustic requirements must be reviewed.
Can I install an additional underlayment?
Only if the manufacturer expressly permits it. Excess padding can create movement and affect the locking system.
Do 72-inch planks require a flat subfloor?
Yes. Proper flatness is essential for joint performance, stability, and a successful long-plank installation.
Explore related flooring
Browse related flooring collections, brands and styles before making your final choice.



