Collection: Lions Floor BevelMark Collection

Bring natural wood character into your home with Lions Floor BevelMark. These waterproof 9x72 SPC planks combine an 8mm profile, 20 mil wear layer, realistic EIR texture and softly shaped bevels. Explore the range to find a floor that complements your kitchen, living room and connected spaces.

Lions Floor BevelMark Collection

Lions Floor BevelMark brings together long wood-look planks, registered grain texture and a distinctive pressed edge. Its waterproof SPC construction gives homeowners a practical alternative to real wood when choosing a continuous floor for kitchens, dining areas and everyday living spaces.

The defining combination is an 8mm total profile, a 20 mil wear layer and a 9-inch by 72-inch plank. Start with that construction, then consider how the wide boards, softly shaped bevels and surface detail will look alongside your cabinetry, furniture and lighting.

What Makes BevelMark Different?

BevelMark uses embossed-in-register, or EIR, texture. This means the surface relief follows the printed wood grain, helping the appearance and feel relate more closely. Its pressed, pillowed bevel adds a shaped transition around the board rather than relying only on a painted line.

Those details influence the finished room differently. Grain texture becomes noticeable in angled daylight, while the bevel helps define individual planks across the installation. If board edges are an important part of your design, look at several full planks together before deciding.

Explore the wider Lions Floor flooring collection when comparing this construction with other plank profiles and installation types. Keep your comparison focused on the features that matter in the actual room.

Understanding the 8mm Construction and 20 Mil Wear Layer

The total thickness consists of a 6.5mm core and 1.5mm attached acoustic padding. The padding is included in the 8mm measurement. This matters when calculating the finished height beside tile, door thresholds and stair components.

The 20 mil wear layer describes the protective vinyl layer above the decorative image. It is a different measurement from millimeters of total thickness. A substantial profile does not automatically mean a thicker wear layer, and either number alone is insufficient for judging the complete floor.

For a closer specification comparison, browse 20 mil 8mm 9x72 SPC flooring. Evaluate edge design, texture and installation instructions alongside those shared dimensions.

Where 9x72 Planks Work Best

Six-foot boards can produce a less interrupted pattern than shorter planks because there are fewer end joints along a given run. The nine-inch width gives each board more visual presence. Together, those dimensions can suit open living areas, larger bedrooms and rooms connected through broad openings.

A long plank can also work in a smaller space. The deciding factors are room proportions, grain movement and the direction of installation. Measure the proposed layout so narrow strips at walls and awkward end cuts are considered before work begins.

For more room planning ideas, explore vinyl flooring for living rooms. Consider how sofas, rugs and dining furniture will cover the board pattern rather than judging the floor only in an empty room.

BevelMark for Kitchens and Connected Dining Areas

A waterproof plank material is useful around ordinary spills and everyday kitchen activity. It can help create a consistent wood-look foundation where the kitchen connects to a family room or dining area.

The finished installation still needs correct perimeter details, subfloor preparation and prompt cleanup. Waterproof flooring does not make cabinets, walls or the underlying slab waterproof. Follow the installation instructions around appliances and fixed cabinetry, particularly where a floating floor must remain free to move.

Compare SPC flooring for kitchens when planning a larger renovation. Review appliance clearances and future dishwasher removal before choosing the finished floor height.

Surface Texture, Pets and Everyday Wear

EIR grain and a UV acrylic finish contribute to BevelMark's surface character. The textured wood look can make small changes in lighting and ordinary daily marks less visually prominent than a completely uniform surface. It remains important to protect the floor from grit and concentrated friction.

Use suitable entrance mats, furniture pads and regular dry cleaning. Lift heavy furniture rather than dragging it, and keep pet nails maintained. A 20 mil wear layer is useful surface protection, but the flooring should not be described as scratch-proof.

Households comparing similar constructions can also browse 20 mil waterproof vinyl plank flooring for dogs. Choose color and texture according to the household's real cleaning habits and the light in the room.

Attached Padding and Installation Planning

BevelMark is specified for floating Uniclic installation. The attached acoustic pad is part of the plank construction, but it does not eliminate the need to review subfloor moisture, flatness or any required vapor protection.

Extra underlayment should be added only where the manufacturer permits it. An unsuitable soft layer can change the support beneath the locking joints. Likewise, a thick plank should not be used to bridge dips, rocking tiles or an uneven slab.

For broader profile comparisons, explore thick waterproof flooring. Consider the complete installation height, the approved accessories and the transitions to adjoining surfaces before ordering.

Choosing Color Without Losing the Wood Character

Place samples flat on the floor beside the finishes they must coordinate with. Cabinet doors, countertop samples and wall paint can change whether a neutral wood look appears warm, gray or golden.

View the sample in morning daylight, shaded light and evening lighting. Look across it from a seated position as well as from above, because the EIR grain and pressed edge may become more prominent when light travels across the surface.

Avoid choosing from one small photograph alone. A larger sample area helps reveal grain variation and the balance between the plank face and the bevel.

Measuring and Ordering Your Project

Measure each connected area separately, including closets and door recesses. Add material for layout cuts and board selection, with the allowance suited to the room shape and installation direction rather than a single assumption for every project.

Confirm carton coverage, transition profiles and stair requirements before placing the order. Keeping spare matching planks can help with future localized repairs. Before installation, inspect the material and plan the board arrangement so repeated grain images do not gather in one visible area.

Frequently Asked Questions

What are the main specifications of Lions Floor BevelMark?

BevelMark is waterproof SPC with an 8mm total thickness, 20 mil wear layer, 9x72 planks, EIR grain texture, pressed pillowed bevels and attached acoustic padding.

Does BevelMark's 8mm thickness include the attached pad?

Yes. The specified construction combines a 6.5mm core with 1.5mm attached padding. Use the total measurement when planning thresholds, transitions and appliance clearance.

What is a pillowed bevel?

It is a shaped edge that gives the plank perimeter a softer contoured appearance. Review a full sample to see how the edge looks across several adjoining boards.

Is BevelMark suitable for a kitchen?

Its waterproof SPC material makes it worth considering for kitchen use. Confirm the installation requirements for the subfloor, perimeter, appliances and fixed cabinets before installation.

Is EIR texture the same as real hardwood?

No. EIR is a surface technique that aligns embossed texture with the printed grain. BevelMark remains vinyl flooring with an SPC core, rather than a real wood surface.

Can I install BevelMark over an uneven floor?

The supporting surface must meet the required flatness and preparation standards. The 8mm profile and attached pad do not replace leveling or necessary subfloor repairs.