Collection: Aperion New World II Collection

Give connected rooms a spacious wood-look foundation with Aperion New World II. Wide 9x60 waterproof SPC planks combine a 20 mil wear layer with a 6.5mm profile and attached IXPE padding. Painted bevels define each board, creating a practical, inviting floor for everyday living and other approved applications.

Aperion New World II Collection

Aperion New World II is waterproof SPC vinyl plank flooring with a 20 mil wear layer, 6.5mm total construction and 9-by-60-inch boards. Its published build combines a 5mm rigid core with 1.5mm attached IXPE padding. Painted bevels define the plank edges, while a Uniclic system connects the boards for floating installation.

The wide, five-foot format makes New World II relevant to buyers who want fewer visual divisions across the width of a room. Its construction should be compared with the space's daily use, floor-height constraints and substrate condition. A broad wood-look plank can create continuity, but planning remains essential when several rooms connect.

Identifying the New World II Range

New World II is part of Aperion's click SPC category. The decorative wood image sits above a rigid core and beneath the protective wear layer. It offers wood-inspired styling without a real hardwood veneer, so its construction and maintenance should be assessed as vinyl flooring.

Start with Aperion flooring when comparing the brand's different installation types. A click product and a glue-down product may look similar online yet need different preparation and finished-floor planning. Confirm the range and specification before comparing price or calculating material for a complete project.

What the 6.5mm Construction Includes

The 6.5mm measurement is the complete profile, including the 1.5mm IXPE pad. The 5mm core is only one component. Keeping those figures separate helps buyers compare similar-looking flooring without assuming that every published thickness refers to the same part of the plank.

Explore 20 mil 6.5mm 9x60 SPC flooring for a direct specification comparison. Measure the finished height at adjoining tile, doors and appliance openings. The installed elevation also depends on subfloor preparation and any required protection layer, so plan the whole assembly rather than the board alone.

Wide Boards in Open Floor Plans

Nine-inch planks give the grain design a broad surface, and the 60-inch length creates an extended line through the room. This scale can suit open living and dining areas where the floor remains visible around furniture. It also provides a useful contrast to busy countertops or decorative walls.

Compare 9x60 SPC flooring when board proportions are an important design choice. Wider planks do not require a large room, but compact spaces need careful row planning. Check the first and last row widths and consider how the installation direction continues through doorways and hallways.

The Role of the 20 Mil Wear Layer

A 20 mil wear layer describes surface protection above the printed design. It is separate from the total thickness and does not determine underfoot comfort by itself. The coating, the way the surface is used and routine care also influence its appearance over time.

Our 20 mil SPC flooring collection helps compare this surface category across different profiles. In a busy household, remove tracked grit and protect furniture contact points. A thicker protective layer does not prevent every mark from sharp debris, heavy impacts or objects dragged across the floor.

Painted Bevels and Wood-Look Definition

Painted bevels outline the board edges, creating a visible plank pattern. That definition can make a broad floor feel more like individual boards rather than a flat sheet. Consider the contrast at those edges when pairing the flooring with cabinetry, furniture and neighboring surfaces.

A sample should be evaluated under daylight and evening lighting. View it horizontally beside the materials that will remain in the room. Several boards or a larger display can show variation more accurately than one small piece, especially when the space has strong light from large windows.

Living Rooms, Kitchens and Daily Activity

New World II can be considered for approved residential spaces where waterproof plank materials and a wood-look surface are useful. A living area may emphasize appearance beside sofas and rugs, while a kitchen also needs planning around cabinets, appliances and ordinary spills.

Compare vinyl flooring for living rooms when choosing a shared-space surface. If several rooms will use the same floor, resolve transitions and continuous-run limits before ordering. Visual consistency works best when the installation requirements are considered alongside the desired open layout.

Attached IXPE Padding and Sound Planning

The attached 1.5mm IXPE backing is part of the collection's published construction. It should be considered when comparing the complete flooring system, but should not be assumed to meet every building's acoustic criteria. Sound performance depends on the floor, substrate, ceiling and other layers working together.

For apartments or upstairs projects, compare flooring for apartments while checking any assembly approval requirements. Confirm whether additional underlayment is permitted before adding it. An attached pad does not automatically replace required vapor protection over concrete, and extra softness is not always appropriate beneath a locking floor.

Waterproof Planks and Moisture Beneath the Floor

Waterproof SPC materials are useful around ordinary household spills, but do not seal the room or solve water moving through the substrate. A floor can resist surface water while the layers below it remain vulnerable to an unresolved leak or damp slab.

Test and prepare concrete as required, and repair plumbing issues before installation. Remove spills promptly from the finished surface. For bathrooms or other wet locations, verify the exact application and perimeter requirements rather than assuming that all waterproof vinyl can be installed under the same conditions.

Preparing for Uniclic Floating Installation

The locking system joins the boards into a floating surface. Successful installation still depends on flatness, moisture management and expansion clearance. Fixed cabinetry, islands and perimeter trim should not trap the flooring or prevent the movement required by the instructions.

Plan the board direction before cutting the first row. Check long sightlines and changes in room width, then account for doorways and closets. Confirm transition profiles early so height changes are managed deliberately rather than leaving unsuitable gaps or abrupt edges between materials.

Ordering and Maintaining New World II

Measure the whole project, including closets and adjoining areas that will be covered. Add an allowance for cuts based on the layout, and consider spare boards for future repairs. Wide planks can produce different waste patterns from narrow boards, especially around irregular walls.

Use suitable mats, protect furniture contact points and remove grit regularly. Follow the manufacturer's cleaning guidance and avoid products that leave buildup around board edges. Prompt cleanup and thoughtful furniture handling help preserve the appearance without relying solely on the waterproof or wear-layer specifications.

Frequently Asked Questions

What type of flooring is New World II?

New World II is Aperion waterproof SPC click vinyl plank flooring.

How thick is the complete plank?

Its published 6.5mm total construction consists of a 5mm core and 1.5mm attached IXPE pad.

What are the board dimensions?

The collection uses 9-inch-wide boards measuring 60 inches long.

What wear layer does New World II have?

The surface specification is 20 mil, independent of the total plank thickness.

Does it use a floating installation?

Yes. The collection uses a Uniclic locking system and must be installed over a suitable prepared substrate.

Can New World II be considered for upstairs spaces?

It can be compared for approved upstairs applications. Building acoustic requirements and the complete installation assembly must be checked separately.